Electric Eel or Water Jetter - Which Is More Effective In Clearing Blocked Drains?

!±8± Electric Eel or Water Jetter - Which Is More Effective In Clearing Blocked Drains?

The high pressure water jetter (or water blaster) and the electric eel (or plumbers snake) are the two most common plumbing tools used by plumbers when cleaning blocked drains. Plumbers don't charge the same amount for these two tools though, and one of the two is often much more effective than the other. Before deciding which should be used to clear your blocked sewer or stormwater line, it is thus worthwhile knowing a little about how electric eels and water jetters work and their relative effectiveness.

High Pressure Water Jetter

A water jetter is a specially designed high pressure pump that is used by plumbers to blast away blockages and clear blocked drains. Normally powered by a fuel generator, the nozzle is inserted into the blocked sewer or stormwater line through an inspection opening (access point). The water jetter then blasts water done the line, clearing away whatever is causing the blockage and allowing water to drain freely again.

Electric Eel

The electric eel is basically a cutter with spinning blades attached to the end of a steel cable. Again, the cable and cutter are inserted into the blocked sewer or stormwater line through an inspection opening. The cable is fed into the line until the cutter reaches the cause of the blocked drain, where it will spin and chew through the blockage.

Which is more effective?

The high pressure water jetter is often more effective, completely flushing whatever is causing the blockage out of the line, rather than simply cutting through the blockage it and leaving the debris in the line as the electric eel does. It is more effective against grease which congeals in the cold water that is pumped down the line and is then washed away. And the water jetter is just as effective 60 metres down the line as it is 1 metre down the line, as opposed to the electric eel which gets increasingly less effective the further down the line it goes. The water jetter is also cleaner for the surrounds and can gain access more easily through a vent or the toilet pan.

Plumbers will generally charge more to clear a blocked drain using a water jetter than to clear it using the electric eel as the equipment and running costs are greater for the former. Some charge only slightly more while others plumbers significantly more, but it can be worth paying the extra for the water jetter as it will often be more effective in flushing away all of the debris that is causing the blockage. And this will be more likely to prevent the blockage reoccurring in the near future.

Electric Eel or Water Jetter - Which Is More Effective In Clearing Blocked Drains?

Kirkland Wa Apartments For Rent Clearance Sale Exercise Bike Power Generator Order

Wayne PLS100 1 HP 720 GPH Portable Lawn Sprinkling Pump, Stainless

!±8± Wayne PLS100 1 HP 720 GPH Portable Lawn Sprinkling Pump, Stainless

Brand : Wayne | Rate : | Price : $118.47
Post Date : Dec 04, 2011 05:36:36 | Usually ships in 24 hours

The Wayne 1 HP 720 GPH portable lawn sprinkling pump is designed to draw water from ponds and rivers to sprinkle lawns or gardens, clear standing water, and empty or fill tanks. It's made from durable stainless steel that holds up to wear and has threads that won't strip. The pump generates suction lift of up to 20 feet, with a maximum discharge head of 180 feet and 720 gallon per hour maximum flow rating. The automatic thermal protection prevents overheating if small extension cords are used to power the pump, and a garden hose adapter makes start-up simple. You should use this pump with the highest amp-rated cord possible for optimum performance. Wayne backs its pump with a one-year limited warranty.

• Multi-purpose 1 HP pump
• Generates suction lift up to 20 feet
• Made from rugged stainless steel
• Pumps up to 720 gallons per hour
• 1-year limited warranty

Leather Tufted Ottoman Top Quality

Creation OF An Electric Generator In The Context Of Electrical Work

!±8± Creation OF An Electric Generator In The Context Of Electrical Work

Before everything else, here is a summary of what an electric generator and how it connects to the electrical work. Electric generator is a device that converts mechanical energy into electrical energy. A generator forces the electrons in the windings of flow through the external electrical circuit.

Is analogous to a water pump, which creates a flow of water, but does not create the water inside. The mechanical energy source may be a reciprocating engine or a steam turbine, the water falls through a turbine or waterwheel, an internal combustion engine, a wind turbine, a hand crank, air or any other energy source mechanics.

The construction of an electric power generator floor is a simple home project. We think that the construction of this, lots and lots of electrical work and effort is needed, while the possibility of complications can arise. Technically, the energy generated can be influenced by a number of different factors that are discussed below, but usually these plans are a generator with enough power to light a bulb 1.5v.

Cut the wood in half to cut one of those halves in half so you have a piece of wood 12 inches and two 6 inch pieces. Using the 12-inch piece as the basis to build a "U" shaped frame, placing 6 inches in length perpendicular to the base unit, the nails in place.

Drill ¼ inch holes in each of the vertical sections of its frame, make sure they are aligned with each other and the hole goes right through the wood, without deviating from an angle.

Next, drill a ¼ inch hole through the center of the bar magnet. Be as specific as possible about finding the center, measuring carefully from all sides. The hole must pass through the wider side, so that when it is inserted into the shaft to be square to each other.

Cut a section of 4 inch cardboard tube. If you do not have a tube, you can use construction paper to make your own.

The document must be reasonably strong, as have the copper wire wrapped and needs to maintain its shape when in position. Ideally, the tube should be just large enough to allow the magnet to rotate within it without touching the edges. A smaller amount of free space there is a higher voltage. Wrap copper wire around the tube, leaving about 18 inches free at each end to connect the item to power as a light bulb. To increase tension, including more wire around the tube.

Slide the metal shaft through one side of the frame then put the magnet on the shaft. Place the rolled copper tube on the magnet and slide the shaft through the other side of the frame. You want a few inches of the shaft protruding from each side of the frame. Once everything is set, glue the magnet in place using high strength glue or epoxy. Hold the tube in place on the magnet sticking cartelists supports the structure below it.

Attach a washer to the outside of the frame on each side, where stands the shaft to help keep the frame into use while the shaft rotates.

Join the ends of copper wire to a light bulb or test meter then turn the shaft as fast as possible. To help spin the shaft faster, you may want to add a handle or a string of wind that can shoot the release as you would with a top. Enough energy must be generated to turn to light a small light bulb.

Creation OF An Electric Generator In The Context Of Electrical Work

Sharp Notevision Projector Guide Brand New Rice Krispie Recipe Low Cost Neuton Cordless Electric Mower

Portable Generator Must Haves - If You Buy a Generator Without These Features You'll Be Sorry

!±8± Portable Generator Must Haves - If You Buy a Generator Without These Features You'll Be Sorry

Feature #1: Electric Start

This feature enables a generator to be easily started without having to pull a starter rope.

Feature #2: Low Oil Shutdown

I would classify this feature as MANDATORY on any portable generator. It shuts the engine down if the oil level drops below a safe operating level.

Feature #3: Idle Control

Automatically throttles down engine when no power is being drawn from alternator. This feature saves fuel, cuts down on noise and reduces engine wear.

Feature #4: Hour Meter

This feature helps with maintenance by keeping a record of how long engine has run. Now you can automatically schedule oil changes.

Feature #5: Large Fuel Tank

If your generator is used for providing backup power during power outages, get a fuel tank with a capacity of five gallons or more. These units can run on average, seven to ten hours before refueling.

Feature #6: Ball Bearing Alternator

This simply amounts to a cheap generator versus a quality generator. The alternators with the ball bearing costs more than the ones with the needle bearings but they last longer.

Feature #7: Brushless Alternator Design

This feature boils down to common sense and pure economics; brushless alternators require less maintenance and produce cleaner power, which is more suitable for today's sensitive electronic equipment. Brush-type generators have brushes that are wear items, requiring replacement.

Feature #8: All-Metal Alternator

How many times have we seen portable generators go clunk because of cheap manufacturing? More than you ever want to know! Stay away from generators that have alternators with plastic housing because they are known to warp over time and cause moving parts within the alternator to come out of alignment, wear excessively and eventually break. Get an all-metal alternator.

Feature #9: Cast Iron Sleeve

If you expect to utilize your generator often or for long periods of time, this feature is absolutely crucial! Hidden in the cylinder of some engines is a cast iron sleeve liner that reduces wear, which makes the engine last longer, which saves you money. The added cost of a generator with a cast iron sleeve in the engine is small and well worth it.

Feature #10: OHV (Overhead Valve) Engine

This technology is suited for portable generators because it produces fewer emissions than side-valve (pushrod) engines, OHV engines start easier, run quieter, and they have proven to last longer.

Feature #11: Full Power Switch

This allows you to switch off the 240 Volt output to get more 120 Volt power from the generator. This feature is useful for starting 120 volt electric motors on air compressors and water pumps.

Feature #12: Portability Kit

Some generators, although portable, seem like they weigh a ton. With a portability kit, (wheels and handles specifically made for that generator) you can move the heavy units around with relative ease.

Feature #13: Total Harmonic Distortion (THD)

Total Harmonic Distortion is a means to measure the quality of the output electricity of a generator. Six percent THD is considered the upper limit for "clean" electricity. Go above 6% THD and the electricity will most likely reduce the life of electrical circuits, cause microprocessors to malfunction and cause furnace controllers to operate incorrectly. A good generator has less a THD of less than 6%. Be warned, some generators produce a THD greater than 15%. Make sure you know what your THD is before you buy.

Feature #13: Brand Name

For some items, brand names won't make that much of a difference, but when it comes to portable generators, brand names such as Honda, Briggs & Stratton, Cummins, etc., are worlds apart from the cheap generator knock offs. You'll save up front money when buying a cheap generator, but on the back end (terrible fuel efficiency, loud noise, breakdowns, high maintenance, etc,) they will cost you much more than a brand name when it's all told.

Portable Generator Must Haves - If You Buy a Generator Without These Features You'll Be Sorry

Coupon Moong Dal Sprouts Glass Topped Desks Discount

Backhoe Stuck In Mud

!±8± Backhoe Stuck In Mud

Have another job digging out mud.

Backhoe Stuck In Mud

Homemade Baby Food Right Now

D8 Pond Update

!±8± D8 Pond Update

It came a big rain before the job was finished. Edited with Adobe Premiere Pro CS5 H.264 MP4 1920x1080 59.94fps bitrate cap 8009kbps size 133mb

D8 Pond Update

Bargain Sale Technics Sl1210 Ludwig Junior Drum Compare !8!# Mio Heart Rate Monitor Watch Clearance Sale

Under the pressure of washing power

!±8± Under the pressure of washing power

High pressure cleaners can remove dirt and grime much more efficient and effective than conventional methods, and make your spring cleaning projects easier to complete.

Fearing the thought of cleaning the fitting for garden hose, a bucket and a brush? Consider purchasing a pressure washer on your job easier. High pressure cleaner to remove dirt and grime much more effectively and efficiently than traditional methods. A high pressure cleaner combines an electric motor or gasMotor and the pump will turn on a garden hose in common a powerful cleaning machine. Cleaning solutions may be added to water pressure cleaning for best results, and adjustable nozzle tubes and brushes soak cleaning.

Four main categories of pressure washers are lightweight electric, gas-operated housing, heavy-duty gas control, gas and driven professional. When shopping for high-pressure cleaner to get to know some important terms that are "poundper square inch "(PSI), water pressure, and the show" gallons per minute "(BPM), which shows how much water is discharged through the window at a certain time.

The electric light versions work well for washing cars, boats, house siding, decks, fences, garden furniture and sweep the dirt. This type of record is 1,300 to £ 1,400 PSI 1.5 GPM and uses. It sells for $ 150 to $ 200.

Residential pressure washers have gas engines. These units havemore power than the electric light, so that all the mentioned activities, as well as work well to remove stubborn dirt from lawn and garden equipment. Typically there are about 1650-2400 psi, and a 3.75 hp side-valve six or head of the engine and costs $ 300 to $ 500 (Schulteis)

Heavy pressure washers are more durable motors and pumps for superior performance. This type of cleaner is a good investment, if the washeroften, as in a field painting, which is used to prepare the disk for painting houses. These units have 2400-3000 psi, a 5.0 to 8.0 hp overhead valve or overhead valve industrial engine and cost between $ 500 - $ 900

Professional pressure washers are designed with an industrial motor and pump to accommodate for professional users. These machines are powerful enough to clean brick and concrete, and also remove the graffiti. You have 2500-4000 psi, a 6.5 to 15HP Premium Industrial OHV engine and especially in the retail of $ 800 to $ 1,400.

Consider a high-pressure cleaner for those pesky spring cleaning, as well as large projects such as the preparation for painting. Not only is it faster to get to work, but a new instrument always makes a project more interesting.

The sources are: Christopher Schulteis, American Homeowners Association (AHA) ®

Under the pressure of washing power

Old Gringo Villa Save You Money!

Briggs & Stratton Premier Garuda demovan PART-2

!±8± Briggs & Stratton Premier Garuda demovan PART-2

Demo of agricultural machinery for Odisha India. Company: Premier Power Equipment and Products Pvt.Ltd .., (OEM) Briggs & Stratton-Coimbatore Tamilnadu. Product Garad MINI WEEDER, AGRI WEED CUTTER, 4.5 HP WATER PUMP

Briggs & Stratton Premier Garuda demovan PART-2

Promotions Canon Mp190 Ink Good Bargain Healthiest Dog Food Saved Used Stihl Chainsaw Parts

Echo PB461LN

!±8± Echo PB461LN

Nothing special - just running the fan after I was done by the hip-mounted throttle again.

Echo PB461LN

Cheap Rebounders Trampolines Yasaka Shears Clearance Sale

Key considerations for the purchase of a generator extension cord

!±8± Key considerations for the purchase of a generator extension cord

3.5 million U.S. households lost electricity in their homes each week of the year, according to the National Weather Service. In an instant, they are lights, heat, cold, lost communications and other essential services.

In years past the loss of power in a home or office was little more than a nuisance. Even today a few hours without electricity a little more than a nuisance. That is, instead, the loss of electricity for several days and the consequences can range fromdestructive, lethal.

As our dependence on technology in the 21 st Century, it is easy to imagine how destructive it can be a few days without power: heating and cooling systems fail. And then freeze the pipes burst, causing flooding and structural damage. Sump pumps fail, creating more damage when the basement and the basement flooded. Security systems fail, so that businesses and residences an easy target for thieves and looters. Booty food in refrigerators and freezers that are dead. Wells arrestPump water. The potential for dangerous fires tip, because most Americans have forgotten how to live safely with candles and kerosene lamps.

In fact, the National Weather Service says that the weekly cost of business interruption of electrical service, and U.S. homeowners $ 80000000000 a year. Homeowners increasingly experienced a portable generator to use with this expensive energy losses to overcome. In general, gas-powered, put these versatile units quickly so that the home or smallEntrepreneurs to quickly restore power to devices and services selected.

However, the prerequisite for the electricity from a generator, a sump pump, refrigerator, fountains, etc. Transfer of a generator extension cords. And choosing the right makes the difference in terms of safety and performance.

The most important considerations when choosing an extension cord generator

The doctrine of the cable The length of the cable Connector Resistance An outdoor All Weather Rating

The doctrine of an extension cord generator refers to its electrical conductors. The lower the number (eg 12 gauge, 10-gauge, 8-gauge), the thicker and heavier the wire. 10-gauge will be the minimum size for use with portable generators. Lighter extension cords are not recommended because they can not always provide the necessary amperage needed to power the devices with which they are linked. The length of an extension cord mayseem obvious: Get one that is too short, and suddenly you live too close to a noisy generator harmful. But there are also "too long". Get a generator and extension cord is too long, and you will experience drop-off in progress. Also, wear long strings hard, hard to keep the coil and a pain!

A high quality, properly designed generator is always heavy cable connectors that the cable can be injected. Well-formed plug with strain relief collars preventEnd of the cable to pull out of the body and help to ensure years of trouble-free operation. A clear plug and socket, verify all equipped with power LED, a desirable feature in generator is usually high-end extension. This convenient and practical way, the user can easily know that both the power and the output circuit, and the weather worries.

Finally, because the generators are often used in adverse conditions, and prolongs the generator should always be firstimportant is to be designed for outdoor use, all-season use.

Key considerations for the purchase of a generator extension cord

Crystals Chandelier Parts Quickly Lawn Edgers Discount

Briggs carbs child 2piece Flojet

!±8± Briggs carbs child 2piece Flojet

They are completely (with the exception of the Venturi, which does not remove it again) diss thougholy mounted this carb and clean every component. Personally I like the briggs Flojet 2 pieces of carbohydrates. They are easy to handle and easy to see how they work. This is in good shape and hopeing it works like new.

Briggs carbs child 2piece Flojet

Pvc Fence Pickets Best Quality !8!# Onkyo 808 Sale

Old Big Red B & S

!±8± Old Big Red B & S

This is an old secret and the Briggs Stratton. It 'was given to me by an elderly lady, told me that her husband, who suppose that previously had recently, while passing by. He had no idea why he had. Must read a large pot on the fire pump Co. Hale. and was the model and serial numbers. I tried to run those numbers, and they came away empty-handed. Another thing I found interesting was there was no nameplate on the engine s & b anywhere that the otherFront cover, the operating system was on the front. I learned, however, that this engine can have a model B & S 1960 and it was possible there was a 10 hp. It works well, but it's a little 'oil to burn, but I think it's still a very cool old engine.

Old Big Red B & S

!8!# Cheap Keurig Price Aftermarket Polaris Atv

Hyundai HWP552 2-Inch 5-1/2 HP Gas Powered Water Pump

!±8± Hyundai HWP552 2-Inch 5-1/2 HP Gas Powered Water Pump

Brand : Hyundai | Rate : | Price : $234.54
Post Date : Aug 16, 2011 03:42:07 | Usually ships in 24 hours

Hyundai Power Equipment has a reputation for its high quality equipment and the HPW552 water pump certainly exceeds all expectations. Whether at home, on the farm, or at the cottage this water pump will meet your needs. This particular model features 2-inch suction and discharge ports and a max flow of 36000 liters per hour. Not only does this unit move a large volume of water quickly but its 5-1/2 horse power fuel-efficient Hyundai 4-stroke OHV engine is also very quiet and the durable rubber bushings provide vibration and noise control. Not for sale in California.

• Non-CARB Compliant/Not for sale in California
• Clean burning efficiency, easy to use controls and color coded easy start
• 105-Foot total head, 25-foot total lift
• Durable rubber bushings provide vibration and noise control
• Silicone seals are used in water pump for long lasting pump operation

Pet Vacuum Groomer Order Now

VINTAGE WISCONSIN water pump - works well

!±8± VINTAGE WISCONSIN water pump - works well

I just picked up an old pump.

VINTAGE WISCONSIN water pump - works well

Hot Water Pressure Washers Buy Spalding Basketball Hoop Review

1950 Briggs NPR6 with 'B' BSM & 'S' changes No.3 pump accessories!

!±8± 1950 Briggs NPR6 with 'B' BSM & 'S' changes No.3 pump accessories!

(Correction, it is actually in November 1950, not 1943, as I said in the video) best five dollars I ever spent on an engine! oh, and the pump put out enough water to fill a 5-gallon bucket full in about 35 seconds, fill a 1 liter milk jug in about 8 seconds, and figure out who moves on. not half bad as a basis 9gpm!

1950 Briggs NPR6 with 'B' BSM & 'S' changes No.3 pump accessories!

Photosmart 8150 Buy Now Raichle Mountain Boots Coupon

SHURflo 2088-492-444 Park Model Fresh Water Pump

!±8±SHURflo 2088-492-444 Park Model Fresh Water Pump

Brand : SHURflo
Rate :
Price : $120.99
Post Date : Aug 01, 2011 11:30:10
Usually ships in 1-2 business days

This legendary pump has set the standard for the RV Industry. SHURflo’s 2088 pumps are equipped to deliver high performance and reliability every time they are used. SHURflo’s potable water pumps operate three independent pumping chambers which allow the pump to self-prime and lift water up to 12 feet. With smooth flow and uninterrupted operation, the Classic™ Series pumps include a built-in check valve to prevent back flow into the tank. Each pump features an adjustable switch and has the capability to run dry without damage to the pump or motor.

Promotion Canam Atv !8!# Kitchenaid Mixer Classic Top Quality Shopping Military Royale Watches

Briggs engine and water pump

!±8± Briggs engine and water pump

Here are some things I did at the Motor Show is that I visited. Cast iron Briggs & Stratton is going well, you probably need some work on the road. Homart the water pump is a 1 1 / 2 inches, I do not know how many rpm, but is a bit '.

Briggs engine and water pump

Save Lexmark Driver !8!# Bread Maker Zojirushi Grand Sale !8!# Purchase Homelite Xl Chainsaw Parts

Confused in choosing to buy a water pump gas?

!±8± Confused in choosing to buy a water pump gas?

A water pump motor can be a very useful tool for home, farm, boat and on the labor market. It can be used in all types of tasks, not as important as the emptying of the pool, the help is very important, such as irrigated crops, traveling to a fire and also the drainage of a flooded home or foundation of the structure. But do not choose the right one can seem to do these activities very difficult. So start letting them know the meaning of technical data, and after their connection with asuitable pump.

Spec:

The specifications for all engine-powered water pumps and the main are the following-

1 - Suction
2 - head
3 - engine power (hp)
4 - Suction diameter (DIA)
5 - outlet diameter
6 - discharge capacity
7 - Centrifugal / Trash Pump
8 - Engine / pump brand

What they mean:

1 - The suction power, this represents the maximum distance of the pump can draw water from the common area and a 20 feet, 30 feet
2 - head of thisis the maximum distance from the strait water pump and ranges from 108ft to travel
3-engine power is the power of the engine,
4-aspiration is the size of the diameter of the tube, which can be used on the suction-giving, and usually looks like 1 ", 2" and 3 "
5-diameter exhaust tube size, which can be printed on the page.
6-flow the maximum amount of water, drain pump and it looks like 8000 liters per hour or(GPH).
7-Centrifugal/Trash pump that tells you what kind of pump is centrifugal pumps that can pump clean water or semi-dirty work. Trash means you can pump solids in wastewater. But this category can be divided into at least three other categories feed pump pressure, and chemical membrane.
8 - Engine / pump brand that represents the brand of pump and engine manufacturers.

So you know what the technical data, now we can work together. If you have a pump to empty your home"- 3" swimming pool or in case of flooding can follow the instructions to 26 feet of suction / discharge head 108 ft. / 3.5 to 6.5 hp motor hp / 1 2.1 eye diameter intake / discharge capacity of 6000 to 14,000 type GPH / centrifuge.

If you are one for the court, perhaps for the water you plants and as a means of fire protection up your DOM specification 26ft intake / exhaust head would be 150ft - 258ft / hp 09/06 hp engine / inlet Ø 1 1 / 2 " - 3 "/ discharge capacity of 6000-14000 GPH / centrifugalPressure. Do you want to do the job or trenches for foundations to information would be something like 26 ft suction lift / head 108 ft-130 ft / 6.5 hp engine hp-18 hp dia / 2 Suction look "- 4" / discharge capacity of 6000 -18 000 GPH pump trash / or type of diaphragm pump.

Delete if not in the closure of things in mind when choosing:

1 - What are you doing and where the pumps
2 - As you pump (the higher the pump head is further away)
3-how fast you want to pump (seeGPH)
4-brand this is important if you service after the sale, since not all brands want to have this. a lot 'that offer this service, Briggs & Stratton, Honda and Subaru Robin.

Confused in choosing to buy a water pump gas?

Order Sonocaddie V100 !8!# Weber Genesis Buy Now

Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron

!±8± Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron

Brand : Wayne | Rate : | Price : $112.99
Post Date : Jul 23, 2011 11:16:15 | Usually ships in 1-2 business days

The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It's made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.

• 1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
• Use to pump out flooded basements, tanks, or boats
• Made from durable cast iron steel
• Connects to garden hose with 3/4-inch brass hose connections
• 1-year limited warranty

!8!# Cheaper Garmin Forerunner 305 !8!# Saved Kamik Snow Boots !8!# Andis Clipper Attachments Discount